POSIES Rods and Customs – Super Slide Springs – Street Rod Parts – Hot Rod Parts – Truck Parts – Ford and Chevy Suspensions and Chassis Parts

• Experience – We’ve been building rods and customs continuously since 1964. We’ve used that experience to develop springs and suspension parts that work together as a system.
• Huge Selection – It’s hard to believe, but we have over 800(!) possible ’28-34 Ford spring configurations developed. So, unless your building a street rod with four wheels on the front and a turbine, we know what you need and have the right spring in stock.
• Smooth Ride – Super Slide Springs have die-formed pockets with a low friction Moly-Nylon button for a smooth ride.
• Performance – Our lowered springs are computer designed and manufactured specifically for the best ride and load capacity. They are not de-arched stock springs. Each spring is available with stock or reversed eyes.
• Tour Tested Tough – All POSIES parts are tour tested on our personal cars – we ride what we sell!
• Nostalgia – When thinking about traditional or nostalgia, you know that ’58 Buick finned brake drums are it and trick. You know that ’53 Mercury flat motors are it and trick. Why not think about POSIES’ Super Slide Springs which are it and trick and is what Ford used in all Shoebox Fords ’49 through ’51, which are just a tad older.

Choose from stock spring eyes, low with reversed spring eyes and super low with reversed spring eyes. Custom hand finished round leaf ends also available for an additional $30.00 per spring.

Owners of ’28-34 FORDS can now get ‘em a little lower in front without sacrificing ride with POSIES Super Low Super Slide Springs. The super low spring has one-inch less arch than their standard street rod spring, yet has the same number of leaves to maintain necessary ride characteristics. It is available in 29, 30 or 31 inch widths to work with narrow or standard width front axles. A notch may be required in the frame rails for clearance on some applications, but for those that want to “put it in the weeds”, this is the way to go. Spring leaf is drilled to locate spring clamps (sold separately).

Just like our standard Super Slide Spring, but with specially hand finished leaves with a stylish taper. Our rolled and tapered springs have hidden moly-nylon pads to eliminate friction. Along with the tapered leaves and a specially designed spring pack assembled with concealed 90′s technology, these springs will give your traditionally styled fenderless hot rod the ultimate ride. See part numbers below.

When thinking about traditional or nostalgia, you know that ’58 Buick finned brake drums are it and trick. You know that ’53 Mercury flat motors are it and trick. Why not think about POSIES’ Super Slide Springs which are it and trick and is what Ford used in all Shoebox Fords ’49 through ’51, which are just a tad older.

Please Remember, these are just some our most popular spring part numbers that fit most common combinations. We have over 800 possible configurations for almost any combination such as coupe or sedan, small block vs hemi, so give us a call if your car is not listed here. All springs have holes to locate spring clamps