Leaf Spring Lowering Blocks - 8013

POSIES Lowering Blocks can be used to dial in the ride height you want. Our aluminum blocks are available in 1" or 2" heights. Use to lower the rear of your vehicle by installing between the leaf spring and axle saddle where the axle sits on top of the springs. Can also be used to raise the ride height where the leaf spring sits on top of the axle. We offer rear axle U-Bolts in various lengths and axle tube diameters when a longer U-Bolt is needed to use with lowering blocks.

Features:

Use with 1 3/4" or 2" wide leaf springs
Made from Aluminum Bar Stock
Steel Center Pin 1/2" Diameter 3/8" Height
Recessed Hole on bottom for spring center bolt 

8013-1        1" Lowering Block

8013           2" Lowering Block

Product Dimension: 6 x 4 x 3
Weight: 3 lbs